 |
In Plant Receiving Systems
Bucket Elevator Leg
The Layco Bucket Elevator Leg, available in capacities from 60 to 800 TPH, is built for durability, strength and ease of maintenance. All leg accessories are available in mild and stainless steel. It is designed to load overhead conveyors or can have multiple downspouts to load separate openings on the roof. Its heavy-duty vulcanized drive roller along with crowned self-cleaning boot pulley eliminates slippage and ensures consistent fertilizer capacities.
90 TPH | 120 TPH | 150 TPH | Options
|
|
|
| Frame | 304 stainless steel; 12-gauge head; 14-gauge cap; 10-gauge discharge chute; 14-gauge mid-sections; 10-gauge reinforced boot; 12-gauge dump hopper |
| Flange | 1 1/2" X 1 1/2" X 3/16" stainless steel angle iron, 17 1/2" X 43" O.D. angle measurement for casing; 2" X 2" X 1/4" stainless steel angle iron, 18 1/2" X 44" base measurement |
| Bolts | 3/8" X 1 1/4" stainless steel for assembly; stainless steel take-up; Norway bolts and whiz nuts for buckets |
| Rollers | 20" diameter X 13" crown-faced pulley with vulcanized lagging; 14" diameter X 12" crown turnclean wing boot pulley |
| Belt | 11" PVC belt |
| Buckets | 10" X 6" polyethylene; spacing: 90 TPH = 10"; 120 TPH = 7 1/2" |
| Doors On Boot | Two clean-out doors - one 14 1/2" X 13 1/2" and one 14 1/2" X 24"; one 19" X 23" service door, interchangeable with inlet hopper for filling downside or upside |
| Door On Head | One 10" X 12" inspection door |
| Inspection Section | 14 1/2" X 45 5/8" service door, directly above boot section |
| Casing | 14 1/2" X 40" OD casing measurement |
| Shaft | 2 3/16" diameter head; 1 7/16" diameter |
| Opttion | Jackshaft or gearbox |
| Note | Legs taller than 80 feet will have heavier mid-sections; consult factory. |
|
|
|
| 10" X 6" polyethylene buckets | |
| 10" spacing | |
| All other specs remain the same |
|
|
|
| 10" X 6" polyethylene buckets | |
| 7 1/2" spacing | |
| All other specs remain the same |
|
|
|
| 10" X 7" polyethylene buckets | |
| 9" spacing | |
| 24" dia. X 12" face holz rubber lagged drive rollers | |
| 24" dia. X 12" face turn-clean ring boot pulley | |
| All other specs remain the same |
Other
Capacities Available Upon Request
|
|
|
| Variety of inlet hoppers | |
| Heavy-duty service platform | |
| Rest platform | |
| Service ladder | |
| Safety cage | |
| Downspout and accessories |
12285 E. Main St - P.O. Box 238 - Marshall, IL 62441 - USA
Phone (217) 826-6352 - Fax (217)826-8551
E-MAIL: layco@yargus.com
